Eurorek® basis - Wooden shelving
The construction of the Eurorek® system has the so-called pin-hole connection system. The unique construction makes the racks quick and easy to assemble.
The shelves can be placed in a jiffy and are height adjustable every 5 cm.
Make a choice under the table from the height, the section length and the depth of the wooden shelf rack. The shelf rack is of course supplied with all necessary parts. In the extensive product description you can read which parts are supplied as standard.
| Dimensions | Depending on the chosen set |
|---|---|
| Delivery time | Upon request |
| Supplier | QuickRack |
The Eurorek® shelf racks are standard available in a section length of 1030 mm with a starting rack and five different heights (1500 mm, 1800 mm, 2100 mm, 2400 mm, 3000 mm). Finally, choose from one of the four depth options (300 mm, 400 mm, 500 mm and 600 mm).
Parts
The wooden basic rack system consists of only four parts. All components are supplied depending on the set chosen.
- Open stands
- Shelves
- Cross brace
- End pins
The following components are supplied with the basic shelf rack per height:
| Height | Shelves | Open stands | End pins | Cross brace |
| 1500mm | 4 | 2 | 16 | 1 |
| 1800mm | 4 | 2 | 16 | 1 |
| 2100mm | 5 | 2 | 20 | 1 |
| 2400mm | 6 | 2 | 24 | 1 |
| 3000mm | 7 | 2 | 28 | 1 |
Simple and cheap
Eurorek® distinguishes itself from other systems by the use of Eastern European pine. Eastern European pine is a bit wilder in structure than, for example, Scandinavian pine. The racks from Eurorek® are therefore a lot cheaper than other wooden racks. Other benefits are listed below:
- Warm appearance
- Easy to customize
- Great stability
- High load capacity
- Easy assembly
- Multi-purpose
Mounting
The wooden rack system consists of the above components. Use a screwdriver and a spirit level for assembly.
Holes are drilled every 5 cm in the uprights, so you place the shelves at the desired height. Please note, there is a top and a bottom with the uprights. Lower hole is 7 cm from the end of the posts.
First of all, place 4 end pins in the stand and place the shelf on it. Would you like to expand with extension racks? Then replace 2 end pins for 2 follow pins. Then continue placing the end pins and shelves at the desired heights. Finally, place a cross brace to reinforce the position. In this way the rack is stable!
Accessories and customization
The wooden rack can be put together as desired. For example, are you interested in an extra shelf? Which can! Look at the bottom of the page and add the shelf to your shopping basket. Important! Don't forget to order four extra end pins to place the shelf.
Is the perfect size not among the options? Please contact us and we will look together at what is possible.
| Dimensions | Depending on the chosen set |
|---|---|
| Delivery time | Upon request |
| Supplier | QuickRack |
